This 6-Post Power Rack comes with the Side-Stack Functional Trainer Set — a cable system that integrates 2x 200LB weight stack functional trainers into a single, space-saving 6-post power rack. The benefits of a 6-post rack allow you to leave the middle, 4′ depth portion of the power cage unoccupied so that you can still comfortably lift inside the power cage. The Side-Stack Functional Trainer Set routes the cables along the outside of the cage so that the middle 4′ depth portion of the cage can still utilize attachments, such as safety traps or pin pipe safeties. The back posts are used for equipment storage with Builder® Storage System shelving and plate sleeve options.
The functional trainer trolley is designed to slide anywhere along the height of your upright and does not interfere with the use of j-cups and other Builder® attachments when raised to the top of the upright. This is the best option if you want the benefits and safety of lifting inside a full power cage and the space-saving options of incorporating storage and functional trainer into one unit.
Check out Cable Attachment options for added functionality.
What’s Included
The base unit consists of the following pieces. Select these options to complete the base unit.
- 6x 93″ Builder® Rig Uprights in black powder coat or clear coat or clear coat – rust/discoloration
- 1x Builder Side-Stack Functional Trainer Set
- 1x 4′ Builder® Rig Square Cross Bar 2.0 at the center of the rack with 6 different color options or 4′ Builder® Rig Cross Bar with Logo Plate
- 4x 4′ Builder® Rig Square Cross Bar 2.0 on the sides of the rack with 6 different color options
- 4x 2′ Builder® Rig Square Cross Bar 2.0 on the sides of the rack with 6 different color options
- 1x Additional pull-up bar: Choose from 4′ Powder-Coated Universal Pull-Up and Monkey Bar, 4′ Universal Multi-Height Bar, 4′ Rotating Monkey Bar, combination of Builder® Rig Crown Pull-Up Bar and 4′ Builder® Rig Square Cross Bar 2.0
- Pair of Builder® J-Cups, Powder-Coated Builder® Sandwich J-Cups, or Builder® Monolift
SIDE-STACK FUNCTIONAL TRAINER SPECS | |
BENEFITS OF THE SIDE-STACK SERIES OVER THE FT-2000 SERIES | Space-Saving: Integrates inside the power rack without taking any additional footprint. Uprights utilizing the trolley can still be paired with j-cups for a squat rack.
Aesthetic: Silver aluminum pulleys with silver, magnetic pins provide a very clean two-tone look. Safety: Full-length magnetic pin passes through the entire width of the upright and trolley’s holes for extra security. |
PULLEY RATIO | 2:1 |
STARTING WEIGHT PER STACK | 5 LBS |
MAX WEIGHT PER STACK | 200LB stack feels like 100 LBS (add more weight with the Weight Stack Plate Load Pin) |
INCLUDES | 2x 200LB Weight Stacks with integrated resistance band pegs
Aluminum Pulleys with Aircraft Grade Nylon Cables Trolley with knurled handle and dual magnetic, aluminum pins for adjusting to any height along upright |
TROLLEY LOWEST ADJUSTMENT POINT | 10″ |
TROLLEY HIGHEST ADJUSTMENT POINT | 82″ |
CABLE TRAVEL | 100″ |
BUILDER® UPRIGHT SPECS | |
TUBING SIZE | 3″ x 3″ 11-gauge steel |
ATTACHMENT HOLE SIZE | 1″ holes located on all 4 sides of the upright |
ATTACHMENT HOLE SPACING | 40mm (1.5″) |
ATTACHMENT HOLE RANGE | From 10″ up 70″ high |
BOLTED COMPONENTS HOLE SIZE | 1/2″ holes located on all 4 sides of the upright |
BOLTED COMPONENTS HOLE SPACING | 60mm (2.3″) |
BOLTED COMPONENTS RANGE | From 71″ to top of upright |