The HRFTS-6000 is a 6′ width half rack that integrates 2x 200LB weight stacks into a single, space-saving unit. The 6′ width allows for movements such as chest flys that you can normally only do with traditional cable crossover setups. With our patented Squat Station Conversion Set J-Cups, you’re able to use this 6′ width rack as a squat rack because the j-cups angle inwards to a conventional squat rack width to properly rack your barbell. The 6′ width provides extra storage space to accommodate more equipment on the back uprights of the rack.
The trolley is designed to slide anywhere along the height of your upright and does not interfere with the use of j-cups and other Builder® attachments when raised to the top of the upright. This makes it possible to have a half rack and functional trainer integrated into one unit where you can perform functional trainer movements as well as usage of a half rack all from the same front two uprights. We recommend adding storage accessories such as the Builder® Storage System Shelves or plate sleeves so you can store everything you need on the back uprights of the half rack.
Choose this option if you want a 6′ width rack for chest flys that holds more equipment for storage because of its longer shelves. However, we suggest you choose the HRFTS-4000 if you want to be able to use attachments that only work off 4′ width racks such as spotter arms.
Check out Cable Attachment options for added functionality.
What’s Included
The base unit consists of the following pieces. Select these options to complete the base unit.
- 4x 93″ Builder® Rig Uprights in black powder coat or clear coat or clear coat – rust/discoloration
- 1x Builder® Side-Stack Functional Trainer Set
- 4x 2′ Builder® Rig Square Cross Bars 2.0 on the sides of the rack with 6 different color options
- 1x 6′ Builder® Rig Cross Bar at the center of the rack
- 1x Additional pull-up bar: Choose from 6′ Powder-Coated Universal Pull-Up and Monkey Bar, 6′ Universal Multi-Height Bar, combination of Builder® Rig Crown Pull-Up Barand 6′ Builder® Rig Cross Bar
- 1x Builder® Squat Station Conversion Set
| SIDE-STACK FUNCTIONAL TRAINER SPECS | |
| BENEFITS OF THE SIDE-STACK SERIES OVER THE FT-2000 SERIES | Space-Saving: Integrates inside the power rack without taking any additional footprint. Uprights utilizing the trolley can still be paired with j-cups for a squat rack.
Aesthetic: Silver aluminum pulleys with silver, magnetic pins provide a very clean two-tone look. Safety: Full-length magnetic pin passes through the entire width of the upright and trolley’s holes for extra security. |
| PULLEY RATIO | 2:1 |
| STARTING WEIGHT PER STACK | 5 LBS |
| MAX WEIGHT PER STACK | 200LB stack feels like 100 LBS (add more weight with the Weight Stack Plate Load Pin) |
| INCLUDES | 2x 200LB Weight Stacks with integrated resistance band pegs
Aluminum Pulleys with Aircraft Grade Nylon Cables Trolley with knurled handle and dual magnetic, aluminum pins for adjusting to any height along upright |
| TROLLEY LOWEST ADJUSTMENT POINT | 10″ |
| TROLLEY HIGHEST ADJUSTMENT POINT | 82″ |
| CABLE TRAVEL | 100″ |
| BUILDER® UPRIGHT SPECS | |
| TUBING SIZE | 3″ x 3″ 11-gauge steel |
| ATTACHMENT HOLE SIZE | 1″ holes located on all 4 sides of the upright |
| ATTACHMENT HOLE SPACING | 40mm (1.5″) |
| ATTACHMENT HOLE RANGE | From 10″ up 70″ high |
| BOLTED COMPONENTS HOLE SIZE | 1/2″ holes located on all 4 sides of the upright |
| BOLTED COMPONENTS HOLE SPACING | 60mm (2.3″) |
| BOLTED COMPONENTS RANGE | From 71″ to top of upright |